[Oeva-list] Blink charger reel warning

[Tim Kutscha]

You're welcome. :)

Have fun with your Leaf.  

Tim




________________________________
From: "Norris-York, William" <william.norris-york at intel.com>
To: "Theoldcars at aol.com" <Theoldcars at aol.com>; "oeva-list at oeva.org" 
<oeva-list at oeva.org>
Sent: Thu, April 14, 2011 6:28:11 PM
Subject: Re: [Oeva-list] Blink charger reel warning


Tim Kutscha (our former OEVA president) wrote that info for us.  He is a great 
source of information J
Bill
 
From:oeva-list-bounces at oeva.org [mailto:oeva-list-bounces at oeva.org] On Behalf Of 
Theoldcars at aol.com
Sent: Thursday, April 14, 2011 6:24 PM
To: oeva-list at oeva.org
Subject: [Oeva-list] Blink charger reel warning
 
To whom ever posted the warning on the Blink hose reel I would like to say thank 
you.
 
Took a look at ours and it was as described extremely sharp where the handle 
slides in. Using 80 grit sandpaper I smoothed out the slot and now it fits 
great. I agree It would have only been a matter of time before it would have cut 
into the cable. 

 
I looked back for the original post I thought was on the OEVA but was could not 
find it. 

 
If you have a Blink hose reel I highly recommend you feel for sharp edges in the 
lower slot. Your cable should slide though the opening without any pressure. 

 
Again thank you to the person who pointed this out. 
 
Don Blazer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: /pipermail/attachments/20110414/0ac9e151/attachment.html