[Oeva-list] EV Adapter Machining

Daniel Eyk danieleyk at yahoo.com
Thu Apr 21 22:27:50 PDT 2011


Mr. Datta, I am sending this to both you and the OEVA. I know a  man that I used to work with before I retired and he is probably able to do the machining that you are looking to do at his home. I know him and can safely recommend him. He is in Supervision at Boeing Portland where I worked before I retired. He goes by the nickname Corky and his e-mail address is cmskoien at comcast.net. You are welcome to mention that I referred you to him. He lives in Vancouver, Washington, not to far from where I live. I don't know what he charges as I have not had him do any work for me as I haven't needed any yet. Hope this helps.

Daniel Eyk

Vancouver, Wa.



Electric S-10 project

E-15 project

E8M

--- On Thu, 4/21/11, oeva-list-request at oeva.org <oeva-list-request at oeva.org> wrote:

From: oeva-list-request at oeva.org <oeva-list-request at oeva.org>
Subject: Oeva-list Digest, Vol 90, Issue 51
To: oeva-list at oeva.org
Date: Thursday, April 21, 2011, 12:00 PM

Send Oeva-list mailing list submissions to
    oeva-list at oeva.org

To subscribe or unsubscribe via the World Wide Web, visit
    http://www.rdrop.com/mailman/listinfo/oeva-list
or, via email, send a message with subject or body 'help' to
    oeva-list-request at oeva.org

You can reach the person managing the list at
    oeva-list-owner at oeva.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Oeva-list digest..."


Today's Topics:

   1. Looking for help on my conversion. (Datta, Sham M)


----------------------------------------------------------------------

Message: 1
Date: Thu, 21 Apr 2011 09:49:54 -0700
From: "Datta, Sham M" <sham.m.datta at intel.com>
Subject: [Oeva-list] Looking for help on my conversion.
To: "oeva-list at oeva.org" <oeva-list at oeva.org>
Message-ID:
    <E3280858FA94444CA49D2BA02341C98301305865A5 at orsmsx506.amr.corp.intel.com>
    
Content-Type: text/plain; charset="us-ascii"

Hello,
        I am in the middle of converting my 2010 Jeep Patriot to an EV. I have an Azure motor controller and an AC90 matched traction motor. I live in Hillsboro, Oregon and I am looking for some local business who can machine my traction motor (and Jeep fly wheel) onto Patriot's manual transmission with an adapter plate. I did read through some bad experiences of members who dealt with out of state vendors / mechinists and hence I am looking for some one local in Portland area. Also, it would be easier for me to tranport these heavy parts locally.
        Gary Graunke had kindly given me some contacts, but I could not contact a couple of them as they did not return my calls and thence this posting.

Thanks in advance,
Sham Datta.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: /pipermail/attachments/20110421/3181e60c/attachment-0001.html 

------------------------------

_______________________________________________
Oeva-list mailing list
Oeva-list at oeva.org
http://www.rdrop.com/mailman/listinfo/oeva-list


End of Oeva-list Digest, Vol 90, Issue 51
*****************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: /pipermail/attachments/20110421/e244f03d/attachment.html 


More information about the Oeva-list mailing list